Nat & Samba

Todo lo relacionado con hacer funcionar a Arch como servidor de lo que sea (pagina web, ftp, archivos, firewall & router, etc...).
Responder
inukaze
Archer Intermedio
Archer Intermedio
Mensajes: 78
Registrado: 11 May 2011, 13:41

Nat & Samba

Mensaje por inukaze » 23 Abr 2015, 06:11

Hola muy buenas , veamos , hace poco adquiri un Router Wifi , ahora no puedo conectarme a mi servidor de TeamSpeak3 , debido al NAT
Solo acepta la ip 0.0.0.0 , no puedo usar ni el localhost ( 127.0.0.1 ) , y tampoco mi IP Publica ( La cual es la idea usar mi ip publica )

Alguien tiene alguna guia de como configurar correctamente el modem/router marca y modelo :
ZTE : ZXHN H108L

Y si es posible , establecerme una IP fija con acceso a internet.



Y bueno , espero que puedan ayudarme con eso . ahora lo otro es SAMBA , quiero usar mi intranet tanto la que usa los cables , como los WiFi desde android , lo usaba mucho con el "ES File Explorer" . bien tengo varios problemas con samba , y la configuracion que usaba en LinuxMint 17

1 - No puedo establecer la intranet local , sin que me pida clave

2 - Me aparecen 2 "Equipos" con el mismo nombre , pero uno no conecta y el otro no toma las carpetas compartidas

3 - No quiero que puedan explorar mi $HOME , no se que estoy haciendo mal , y quiero compartir solo ciertas carpetas , la mayoria como Solo Lectura , y solo 2 con permisos de escritura , sin colocarlas en el archivo de configuracion de samba . solo usando :

"net usershare add %n %f “” Everyone:R guest_ok=y" y cosas similares , como hacia en LinuxMint 17

Esto de la primera imagen siempre me aparece , y no se como quitarlo
Imagen

Y esto es que solo explora el HOME :v
Imagen

Estaba intentando escribir la parte para ArchLinux en mi blog , AQUI -> https://inukaze.wordpress.com/acerca-de/xfce-samba/

Actualmente mi archivo /etc/samba/smb.conf , contiene lo siguiente :

Código: Seleccionar todo

# Archivo : /etc/samba/smb.conf
# de Inukaze (De Venezuela)
#
# Sitio Web -> http://inukaze.wordpress.com
#
# Este es mi archivo de configuracion para Samba
# lo uso con Xfce para que me permita comandamente
# Des/Compartir Carpetas en Intranet.
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]
	map to guest = Bad User
	preferred master = no
	local master = no
	domain master = no
	socket options = TCP_NODELAY IPTOS_LOWDELAY SO_RCVBUF=65536 SO_SNDBUF=65536
#	lock directory = /home/inukaze/.smb/
	name resolve order = bcast host
	workgroup = QUINTERED
	usershare allow guests = yes
	map to guest = Bad user

	# lanman fix
	lanman auth = yes
	client lanman auth = yes
	client lanman auth = yes
	client ntlmv2 auth = no

# this [global] come from my file -> $HOME/.smb/smb.conf
# just the above lines nothing more.


## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = QUINTERED

# server string is the equivalent of the NT Description field
	server string = %h server (Samba, Linux Mint)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# Manual :
	local master = yes
	domain master = no
	preferred master = yes

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 192.168.1.2/220 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes

# Manual :
#	name resolver order = lmhosts hosts wins bcast
	name resolve order = lmhosts hosts wins bcast
#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

	# Manual :
#	security = share
	security = user

	username map = /etc/samba/smbpasswd

	hosts allow = 192.168.1.2/220

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam
   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<[email protected]> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
	map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
	usershare max shares = 100

# Manual Add User Controls :
	usershare allow guests = no
	usershare owner only = False

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = no

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
wins support = no
[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0755

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = yes
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = no
   read only = yes
   guest ok = yes

# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin
Ya se que tengo varias lineas repetidas , pero , me gustaria saber si me pueden ayudar a depurar y configurar bien el archivo , para lo que quiero lograr para compartir archivos windows/linux .

Gracias de antemano por cualquier ayuda que me puedan brindar

Responder