Puertos 3.0

Para que preguntes sobre cualquier duda que tengas con la configuración de algún componente de hardware, así como placas de sonido, video o grabadoras.
Responder
norxox
Novato
Mensajes: 2
Registrado: 20 Ene 2016, 12:50

Puertos 3.0

Mensaje por norxox » 20 Ene 2016, 13:09

Buenas, tengo arch instalado en un portatil que cuenta con 2 puertos usb 3.0. Lo que ocurre es que cuando conecto mi disco duro externo a cualquiera de ellos sucede:

- En uno de ellos no se llega a encender la luz que tiene el disco duro pero consigo oir que esta funcionando, obviamente el ordenador no lo detecta.
- En el otro SÍ se enciende la luz y el ordenador me monta el disco duro, sin embargo ocurre que se va desconectado y conectando cada 5 segundos.

He probado el disco duro en un puerto 2.0 que tiene el portatil y funciona perfectamente, tambien he probado dispositivos 2.0 en los puertos 3.0 y funcionan correctamente.

Cabe destacar que esto solo me ocurre en archlinux, en otras distribuciones que tengo instaladas me funciona perfectamente en ambos puertos 3.0.

Mi teoria (que no creo que se la correcta) es que se debe a algún tema de alimentacion de esos puertos, tengo instalado TLP y pensaba que se debía a esto, sin embargo he hecho pruebas desinstalándolo y sigue igual.

Hice una instalacion limpia de arch hace 2 semanas y actualizaciones hasta la fecha con cinnamon de entorno de escritorio.

Gracias de antemano.

Avatar de Usuario
madek
Equipo Hispano
Equipo Hispano
Mensajes: 2149
Registrado: 03 Sep 2009, 12:50
Ubicación: Puente Alto, Chile

Re: Puertos 3.0

Mensaje por madek » 22 Ene 2016, 17:15

y que te arroja la salida de dmesg cuando contectas el disco???
Asi hacemos las cosas => The Arch Way
Judd Vinet "Arch Linux es lo que tú haces de él"
Imagen

norxox
Novato
Mensajes: 2
Registrado: 20 Ene 2016, 12:50

Re: Puertos 3.0

Mensaje por norxox » 24 Ene 2016, 10:28

Lo primero gracias por responder.

dmseg me imprime lo siguiente cuando conecto el disco duro al puerto 3.0 :

Código: Seleccionar todo

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.3.3-3-ARCH ([email protected]) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Wed Jan 20 08:12:23 CET 2016
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=054bea68-d618-445b-a49f-ef56e879c817 rw quiet
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008683dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000008683e000-0x000000008713dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008713e000-0x000000009c852fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c853000-0x000000009cd42fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cd43000-0x000000009cf58fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cf59000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 80EW/Lenovo B50-80, BIOS A8CN47WW(V3.00) 07/14/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x15f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 0080000000 mask 7FE0000000 write-back
[    0.000000]   2 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00FFA00000 mask 7FFFE00000 write-protect
[    0.000000]   5 base 00FFC00000 mask 7FFFC00000 write-protect
[    0.000000]   6 base 0100000000 mask 7F80000000 write-back
[    0.000000]   7 base 015F000000 mask 7FFF000000 uncachable
[    0.000000]   8 base 0160000000 mask 7FE0000000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[    0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[    0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15ee00000-0x15effffff]
[    0.000000]  [mem 0x15ee00000-0x15effffff] page 2M
[    0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x140000000-0x15edfffff]
[    0.000000]  [mem 0x140000000-0x15edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x120000000-0x13fffffff]
[    0.000000]  [mem 0x120000000-0x13fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0x8683dfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0x867fffff] page 2M
[    0.000000]  [mem 0x86800000-0x8683dfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x8713e000-0x9c852fff]
[    0.000000]  [mem 0x8713e000-0x871fffff] page 4k
[    0.000000]  [mem 0x87200000-0x9c7fffff] page 2M
[    0.000000]  [mem 0x9c800000-0x9c852fff] page 4k
[    0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[    0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[    0.000000]  [mem 0x9cfff000-0x9cffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[    0.000000]  [mem 0x100000000-0x11fffffff] page 1G
[    0.000000] RAMDISK: [mem 0x378e4000-0x37c69fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000009CFFE120 0000B4 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFF6000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009CFDC000 0152E9 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009CF54000 000040
[    0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000009CFF9000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000009CFF7000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000009CFF4000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009CFF2000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD8000 0037AA (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD5000 000B74 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009CFF8000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009CFF3000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD7000 000756 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCF000 005AB8 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009CFF5000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD6000 000539 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFFA000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000009CFCE000 0000B0 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000009CFCD000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000015effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x15eff9000-0x15effcfff]
[    0.000000]  [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015a600000-ffff88015e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000015effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000008683dfff]
[    0.000000]   node   0: [mem 0x000000008713e000-0x000000009c852fff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000015effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000015effffff]
[    0.000000] On node 0 totalpages: 1027825
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9918 pages used for memmap
[    0.000000]   DMA32 zone: 634708 pages, LIFO batch:31
[    0.000000]   Normal zone: 6080 pages used for memmap
[    0.000000]   Normal zone: 389120 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x9e000000-0x9fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x8683e000-0x8713dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9c853000-0x9cd42fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cd43000-0x9cf58fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cf59000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88015ec00000 s92824 r8192 d30056 u262144
[    0.000000] pcpu-alloc: s92824 r8192 d30056 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1011742
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=054bea68-d618-445b-a49f-ef56e879c817 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3963176K/4111300K available (5666K kernel code, 937K rwdata, 1796K rodata, 1188K init, 1164K bss, 148124K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:8448 nr_irqs:760 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1995.530 MHz processor
[    0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.35 BogoMIPS (lpj=6651766)
[    0.000038] pid_max: default: 32768 minimum: 301
[    0.000044] ACPI: Core revision 20150818
[    0.021985] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.022007] Security Framework initialized
[    0.022008] Yama: becoming mindful.
[    0.022309] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.023259] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.023673] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.023681] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.023904] Initializing cgroup subsys io
[    0.023908] Initializing cgroup subsys memory
[    0.023916] Initializing cgroup subsys devices
[    0.023919] Initializing cgroup subsys freezer
[    0.023921] Initializing cgroup subsys net_cls
[    0.023923] Initializing cgroup subsys pids
[    0.023949] CPU: Physical Processor ID: 0
[    0.023950] CPU: Processor Core ID: 0
[    0.023955] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.023956] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.025094] mce: CPU supports 7 MCE banks
[    0.025108] CPU0: Thermal monitoring enabled (TM1)
[    0.025117] process: using mwait in idle threads
[    0.025120] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.025121] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.025509] Freeing SMP alternatives memory: 20K (ffffffff81a15000 - ffffffff81a1a000)
[    0.030318] ftrace: allocating 22571 entries in 89 pages
[    0.041506] DMAR: Host address width 39
[    0.041508] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.041515] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.041516] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.041520] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.041522] DMAR: RMRR base: 0x0000009cce9000 end: 0x0000009cd08fff
[    0.041523] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.041527] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.041528] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.041529] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.041530] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.042018] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.042020] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.042604] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.075604] TSC deadline timer enabled
[    0.075607] smpboot: CPU0: Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.075635] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
[    0.075660] ... version:                3
[    0.075661] ... bit width:              48
[    0.075662] ... generic registers:      4
[    0.075663] ... value mask:             0000ffffffffffff
[    0.075665] ... max period:             0000ffffffffffff
[    0.075665] ... fixed-purpose events:   3
[    0.075666] ... event mask:             000000070000000f
[    0.105768] x86: Booting SMP configuration:
[    0.105770] .... node  #0, CPUs:      #1
[    0.120218] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.130145]  #2 #3
[    0.168906] x86: Booted up 1 node, 4 CPUs
[    0.168910] smpboot: Total of 4 processors activated (15970.41 BogoMIPS)
[    0.173216] devtmpfs: initialized
[    0.175450] PM: Registering ACPI NVS region [mem 0x9cd43000-0x9cf58fff] (2187264 bytes)
[    0.175563] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.175653] pinctrl core: initialized pinctrl subsystem
[    0.175695] RTC time: 13:20:04, date: 01/24/16
[    0.175820] NET: Registered protocol family 16
[    0.186373] cpuidle: using governor ladder
[    0.199704] cpuidle: using governor menu
[    0.199726] Simple Boot Flag at 0x44 set to 0x1
[    0.199758] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.199760] ACPI: bus type PCI registered
[    0.199761] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.199835] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.199837] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.199849] PCI: Using configuration type 1 for base access
[    0.200045] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.200046] mtrr: probably your BIOS does not setup all CPUs.
[    0.200047] mtrr: corrected configuration.
[    0.213365] ACPI: Added _OSI(Module Device)
[    0.213366] ACPI: Added _OSI(Processor Device)
[    0.213368] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.213369] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219831] ACPI: Executed 18 blocks of module-level executable AML code
[    0.225055] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.226957] ACPI: Dynamic OEM Table Load:
[    0.226967] ACPI: SSDT 0xFFFF880159279800 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20121220)
[    0.227946] ACPI: Dynamic OEM Table Load:
[    0.227955] ACPI: SSDT 0xFFFF88015921A000 0005AA (v02 PmRef  ApIst    00003000 INTL 20121220)
[    0.228981] ACPI: Dynamic OEM Table Load:
[    0.228988] ACPI: SSDT 0xFFFF88015920FC00 000119 (v02 PmRef  ApCst    00003000 INTL 20121220)
[    0.230805] ACPI : EC: EC started
[    0.237123] ACPI: Interpreter enabled
[    0.237133] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580)
[    0.237142] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[    0.237168] ACPI: (supports S0 S3 S4 S5)
[    0.237169] ACPI: Using IOAPIC for interrupt routing
[    0.237201] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.255895] ACPI: Power Resource [FN00] (off)
[    0.255978] ACPI: Power Resource [FN01] (off)
[    0.256057] ACPI: Power Resource [FN02] (off)
[    0.256135] ACPI: Power Resource [FN03] (off)
[    0.256215] ACPI: Power Resource [FN04] (off)
[    0.257135] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.257142] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.258003] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.258005] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.258840] PCI host bridge to bus 0000:00
[    0.258843] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.258846] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.258848] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.258850] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.258852] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[    0.258853] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfe113fff window]
[    0.258861] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.259144] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.259160] pci 0000:00:02.0: reg 0x10: [mem 0xc1000000-0xc1ffffff 64bit]
[    0.259168] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.259173] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.259469] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.259483] pci 0000:00:03.0: reg 0x10: [mem 0xc3210000-0xc3213fff 64bit]
[    0.259784] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.259808] pci 0000:00:14.0: reg 0x10: [mem 0xc3200000-0xc320ffff 64bit]
[    0.259856] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.260099] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.260140] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.260168] pci 0000:00:16.0: reg 0x10: [mem 0xc321b000-0xc321b01f 64bit]
[    0.260224] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.260523] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.260548] pci 0000:00:1b.0: reg 0x10: [mem 0xc3214000-0xc3217fff 64bit]
[    0.260595] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.260856] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.260893] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.260950] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.261223] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.261261] pci 0000:00:1c.1: [8086:9c92] type 01 class 0x060400
[    0.261319] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.261582] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.261619] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.261677] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.261951] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.261988] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[    0.262047] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.262319] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.262362] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[    0.262611] pci 0000:00:1d.0: reg 0x10: [mem 0xc3219000-0xc32193ff]
[    0.263934] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.264182] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.264224] pci 0000:00:1f.0: [8086:9cc5] type 00 class 0x060100
[    0.264587] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.264607] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.264614] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    0.264621] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.264628] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    0.264635] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.264642] pci 0000:00:1f.2: reg 0x24: [mem 0xc3218000-0xc32187ff]
[    0.264666] pci 0000:00:1f.2: PME# supported from D3hot
[    0.264925] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.264940] pci 0000:00:1f.3: reg 0x10: [mem 0xc321a000-0xc321a0ff 64bit]
[    0.264959] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[    0.265274] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.265353] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
[    0.265399] pci 0000:02:00.0: reg 0x10: [mem 0xc2000000-0xc2000fff]
[    0.265513] pci 0000:02:00.0: supports D1 D2
[    0.265515] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[    0.269842] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
[    0.269846] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.269849] pci 0000:00:1c.1:   bridge window [mem 0xc2000000-0xc2ffffff]
[    0.269854] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.269916] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
[    0.269956] pci 0000:08:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.269984] pci 0000:08:00.0: reg 0x18: [mem 0xc3104000-0xc3104fff 64bit]
[    0.270002] pci 0000:08:00.0: reg 0x20: [mem 0xc3100000-0xc3103fff 64bit]
[    0.270067] pci 0000:08:00.0: supports D1 D2
[    0.270068] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.276504] pci 0000:00:1c.2: PCI bridge to [bus 08]
[    0.276507] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.276510] pci 0000:00:1c.2:   bridge window [mem 0xc3100000-0xc31fffff]
[    0.276726] pci 0000:09:00.0: [8086:08b4] type 00 class 0x028000
[    0.276838] pci 0000:09:00.0: reg 0x10: [mem 0xc3000000-0xc3001fff 64bit]
[    0.277185] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[    0.277304] pci 0000:09:00.0: System wakeup disabled by ACPI
[    0.283316] pci 0000:00:1c.3: PCI bridge to [bus 09]
[    0.283321] pci 0000:00:1c.3:   bridge window [mem 0xc3000000-0xc30fffff]
[    0.286831] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.286883] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.286934] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.286982] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.287029] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.287079] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.287127] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.287175] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.287493] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.287533] ACPI : EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
[    0.287635] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.287637] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.287640] vgaarb: loaded
[    0.287641] vgaarb: bridge control possible 0000:00:02.0
[    0.287750] PCI: Using ACPI for IRQ routing
[    0.293373] PCI: pci_cache_line_size set to 64 bytes
[    0.293708] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.293709] e820: reserve RAM buffer [mem 0x8683e000-0x87ffffff]
[    0.293711] e820: reserve RAM buffer [mem 0x9c853000-0x9fffffff]
[    0.293712] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.293714] e820: reserve RAM buffer [mem 0x15f000000-0x15fffffff]
[    0.293857] NetLabel: Initializing
[    0.293858] NetLabel:  domain hash size = 128
[    0.293859] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.293871] NetLabel:  unlabeled traffic allowed by default
[    0.293901] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.293907] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.295933] clocksource: Switched to clocksource hpet
[    0.301528] pnp: PnP ACPI init
[    0.301737] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.301740] system 00:00: [io  0xfd40-0xfd43] has been reserved
[    0.301742] system 00:00: [io  0xffff] has been reserved
[    0.301743] system 00:00: [io  0xffff] has been reserved
[    0.301745] system 00:00: [io  0xffff] has been reserved
[    0.301747] system 00:00: [io  0x1800-0x18fe] could not be reserved
[    0.301749] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.301753] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.301801] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.301842] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.301845] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.301872] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.301964] pnp 00:04: Plug and Play ACPI device, IDs ETD0630 ETD0000 PNP0f13 (active)
[    0.303026] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.303364] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.303367] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.303369] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.303370] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.303372] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.303374] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.303376] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.303378] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.303380] system 00:06: [mem 0xff000000-0xff000fff] has been reserved
[    0.303382] system 00:06: [mem 0xff010000-0xffffffff] could not be reserved
[    0.303384] system 00:06: [mem 0xff001000-0xff0010ff] has been reserved
[    0.303386] system 00:06: [mem 0xff002000-0xff0020ff] has been reserved
[    0.303388] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.303389] system 00:06: [mem 0xa0010000-0xa001ffff] has been reserved
[    0.303391] system 00:06: [mem 0xa0000000-0xa000ffff] has been reserved
[    0.303394] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.303580] pnp: PnP ACPI: found 7 devices
[    0.309805] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.309838] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.309849] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
[    0.309852] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.309856] pci 0000:00:1c.1:   bridge window [mem 0xc2000000-0xc2ffffff]
[    0.309860] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.309865] pci 0000:00:1c.2: PCI bridge to [bus 08]
[    0.309867] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.309872] pci 0000:00:1c.2:   bridge window [mem 0xc3100000-0xc31fffff]
[    0.309878] pci 0000:00:1c.3: PCI bridge to [bus 09]
[    0.309883] pci 0000:00:1c.3:   bridge window [mem 0xc3000000-0xc30fffff]
[    0.309891] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.309893] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.309895] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.309896] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xdfffffff window]
[    0.309898] pci_bus 0000:00: resource 8 [mem 0xfe000000-0xfe113fff window]
[    0.309900] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.309902] pci_bus 0000:02: resource 1 [mem 0xc2000000-0xc2ffffff]
[    0.309903] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.309905] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
[    0.309907] pci_bus 0000:08: resource 1 [mem 0xc3100000-0xc31fffff]
[    0.309909] pci_bus 0000:09: resource 1 [mem 0xc3000000-0xc30fffff]
[    0.309944] NET: Registered protocol family 2
[    0.310126] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.310205] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.310290] TCP: Hash tables configured (established 32768 bind 32768)
[    0.310315] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.310331] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.310385] NET: Registered protocol family 1
[    0.310401] pci 0000:00:02.0: Video device with shadowed ROM
[    0.322784] PCI: CLS 64 bytes, default 64
[    0.322832] Unpacking initramfs...
[    0.394222] Freeing initrd memory: 3608K (ffff8800378e4000 - ffff880037c6a000)
[    0.394253] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.394256] software IO TLB [mem 0x98853000-0x9c853000] (64MB) mapped at [ffff880098853000-ffff88009c852fff]
[    0.394321] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    0.394323] hw unit of domain pp0-core 2^-14 Joules
[    0.394324] hw unit of domain package 2^-14 Joules
[    0.394325] hw unit of domain dram 2^-14 Joules
[    0.394326] hw unit of domain pp1-gpu 2^-14 Joules
[    0.394463] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x21
[    0.394469] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x21
[    0.394475] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x21
[    0.394483] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x21
[    0.394536] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[    0.394581] Scanning for low memory corruption every 60 seconds
[    0.394879] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.395276] Initialise system trusted keyring
[    0.395370] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.396899] zbud: loaded
[    0.397110] VFS: Disk quotas dquot_6.6.0
[    0.397146] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.397300] Key type big_key registered
[    0.397498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.397535] io scheduler noop registered
[    0.397539] io scheduler deadline registered
[    0.397571] io scheduler cfq registered (default)
[    0.398518] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.398522] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.398539] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.398541] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.398544] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.398561] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.398562] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[    0.398566] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.398582] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.398583] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[    0.398586] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.398594] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.398606] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.398634] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[    0.398638] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.398652] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    0.398654] vesafb: scrolling: redraw
[    0.398656] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.398666] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90000800000, using 4160k, total 4160k
[    0.507308] Console: switching to colour frame buffer device 170x48
[    0.615535] fb0: VESA VGA frame buffer device
[    0.615563] intel_idle: MWAIT substates: 0x11142120
[    0.615564] intel_idle: v0.4 model 0x3D
[    0.615565] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.615822] GHES: HEST is not enabled!
[    0.615890] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.616327] Linux agpgart interface v0.103
[    0.616695] rtc_cmos 00:01: RTC can wake from S4
[    0.616820] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.616848] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.616859] Intel P-state driver initializing.
[    0.616996] ledtrig-cpu: registered to indicate activity on CPUs
[    0.617805] NET: Registered protocol family 10
[    0.618257] NET: Registered protocol family 17
[    0.619043] registered taskstats version 1
[    0.619072] Loading compiled-in X.509 certificates
[    0.619118] zswap: loaded using pool lzo/zbud
[    0.620722]   Magic number: 0:422:332
[    0.620748] tty tty53: hash matches
[    0.620864] rtc_cmos 00:01: setting system clock to 2016-01-24 13:20:04 UTC (1453641604)
[    0.621055] PM: Hibernation image not present or could not be loaded.
[    0.621735] Freeing unused kernel memory: 1188K (ffffffff818ec000 - ffffffff81a15000)
[    0.621739] Write protecting the kernel read-only data: 8192k
[    0.622264] Freeing unused kernel memory: 464K (ffff88000158c000 - ffff880001600000)
[    0.622467] Freeing unused kernel memory: 252K (ffff8800017c1000 - ffff880001800000)
[    0.631184] random: systemd-tmpfile urandom read with 5 bits of entropy available
[    0.663813] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS3] at 0x60,0x64 irq 1,12
[    0.668609] sdhci: Secure Digital Host Controller Interface driver
[    0.668611] sdhci: Copyright(c) Pierre Ossman
[    0.669625] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.669716] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.677021] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 46
[    0.677053] ACPI: bus type USB registered
[    0.677083] usbcore: registered new interface driver usbfs
[    0.677094] usbcore: registered new interface driver hub
[    0.677122] usbcore: registered new device driver usb
[    0.678106] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    0.678109] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    0.678143] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.678154] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.678216] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.678383] ehci-pci: EHCI PCI platform driver
[    0.679239] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.679246] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.679513] hub 1-0:1.0: USB hub found
[    0.679526] hub 1-0:1.0: 11 ports detected
[    0.681378] SCSI subsystem initialized
[    0.682763] libata version 3.00 loaded.
[    0.682949] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.682956] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.683177] hub 2-0:1.0: USB hub found
[    0.683190] hub 2-0:1.0: 4 ports detected
[    0.684233] usb: failed to peer usb2-port3 and usb1-port2 by location (usb2-port3:none) (usb1-port2:usb2-port2)
[    0.684238] usb usb2-port3: failed to peer to usb1-port2 (-16)
[    0.684240] usb: port power management may be unreliable
[    0.684464] usb: failed to peer usb2-port4 and usb1-port2 by location (usb2-port4:none) (usb1-port2:usb2-port2)
[    0.684468] usb usb2-port4: failed to peer to usb1-port2 (-16)
[    0.684764] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.684774] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    0.684788] ehci-pci 0000:00:1d.0: debug port 2
[    0.688699] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.688721] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc3219000
[    0.699200] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.699521] hub 3-0:1.0: USB hub found
[    0.699533] hub 3-0:1.0: 2 ports detected
[    0.699888] ahci 0000:00:1f.2: version 3.0
[    0.712530] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.712534] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst 
[    0.712901] scsi host0: ahci
[    0.713083] scsi host1: ahci
[    0.713173] ata1: SATA max UDMA/133 abar [email protected] port 0xc3218100 irq 48
[    0.713177] ata2: SATA max UDMA/133 abar [email protected] port 0xc3218180 irq 48
[    0.718227] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.005736] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.032404] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.032422] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.036032] ata2.00: ATAPI: PLDS    DVD-RW DA8A6SH, GL61, max UDMA/100
[    1.037437] ata2.00: configured for UDMA/100
[    1.042397] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[    1.092048] ata1.00: ATA-9: ST500LM000-SSHD-8GB, LVD5, max UDMA/133
[    1.092051] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.129802] hub 3-1:1.0: USB hub found
[    1.129874] hub 3-1:1.0: 8 ports detected
[    1.136187] ata1.00: configured for UDMA/133
[    1.136443] scsi 0:0:0:0: Direct-Access     ATA      ST500LM000-SSHD- LVD5 PQ: 0 ANSI: 5
[    1.140651] scsi 1:0:0:0: CD-ROM            PLDS     DVD-RW DA8A6SH   GL61 PQ: 0 ANSI: 5
[    1.156938] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.156943] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.156990] sd 0:0:0:0: [sda] Write Protect is off
[    1.156994] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.157015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.158836]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[    1.159337] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.174199] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.174204] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.174391] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.392260] tsc: Refined TSC clocksource calibration: 1995.380 MHz
[    1.392264] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39864456686, max_idle_ns: 881590680204 ns
[    1.448867] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    1.550095] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.138450] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.142692] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.142843] systemd[1]: Detected architecture x86-64.
[    2.143107] systemd[1]: Set hostname to <lenovo_B50-80>.
[    2.217606] random: nonblocking pool is initialized
[    2.392092] clocksource: Switched to clocksource tsc
[    2.636302] systemd[1]: bluetooth.service: Cannot add dependency job, ignoring: Unit bluetooth.service failed to load: No such file or directory.
[    2.636753] systemd[1]: Listening on udev Kernel Socket.
[    2.653035] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.653087] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.653098] systemd[1]: Reached target Remote File Systems.
[    2.653107] systemd[1]: Reached target Encrypted Volumes.
[    2.653143] systemd[1]: Listening on Journal Socket.
[    2.653177] systemd[1]: Listening on udev Control Socket.
[    2.653367] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.653405] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.653426] systemd[1]: Listening on LVM2 metadata daemon socket.
[    2.653446] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.653466] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.653788] systemd[1]: Created slice User and Session Slice.
[    2.653883] systemd[1]: Created slice System Slice.
[    2.653896] systemd[1]: Reached target Slices.
[    2.654292] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.654720] systemd[1]: Starting Setup Virtual Console...
[    2.655325] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.656665] systemd[1]: Mounting Configuration File System...
[    2.657288] systemd[1]: Starting Apply Kernel Variables...
[    2.657892] systemd[1]: Mounting POSIX Message Queue File System...
[    2.659444] systemd[1]: Mounting Huge Pages File System...
[    2.659563] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.695854] systemd[1]: Mounting Temporary Directory...
[    2.696295] systemd[1]: Starting Journal Service...
[    2.696728] systemd[1]: Mounting Debug File System...
[    2.696900] systemd[1]: Created slice system-getty.slice.
[    2.712654] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    2.760702] systemd[1]: Mounted Huge Pages File System.
[    2.760736] systemd[1]: Mounted POSIX Message Queue File System.
[    2.760760] systemd[1]: Mounted Temporary Directory.
[    2.761056] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[    2.761257] systemd[1]: Mounted Debug File System.
[    2.761819] systemd[1]: Started Remount Root and Kernel File Systems.
[    2.762537] systemd[1]: Mounted Configuration File System.
[    2.763328] systemd[1]: Starting Load/Save Random Seed...
[    2.765366] systemd[1]: Starting udev Coldplug all Devices...
[    2.765953] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.855624] systemd[1]: Started udev Coldplug all Devices.
[    2.947512] systemd[1]: Started Load/Save Random Seed.
[    2.971115] systemd[1]: Started Apply Kernel Variables.
[    3.526357] systemd[1]: Started Setup Virtual Console.
[    3.538105] systemd[1]: Started Create Static Device Nodes in /dev.
[    3.538626] systemd[1]: Starting udev Kernel Device Manager...
[    3.538646] systemd[1]: Reached target Local File Systems (Pre).
[    3.807441] systemd[1]: Started Journal Service.
[    3.861031] systemd-journald[154]: Received request to flush runtime journal from PID 1
[    4.304107] ACPI Warning: SystemIO range 0x0000000000005040-0x000000000000505F conflicts with OpRegion 0x0000000000005040-0x000000000000504F (\_SB_.PCI0.SBUS.SMBI) (20150818/utaddress-254)
[    4.304119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.371522] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.372459] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input2
[    4.372498] ACPI: Lid Switch [LID0]
[    4.372565] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    4.372568] ACPI: Power Button [PWRB]
[    4.372613] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    4.372617] ACPI: Power Button [PWRF]
[    4.416593] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    4.492400] [drm] Initialized drm 1.1.0 20060810
[    4.518569] hidraw: raw HID events driver (C) Jiri Kosina
[    4.559854] [drm] Memory usable by graphics device = 4096M
[    4.559859] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[    4.559860] fb: switching to inteldrmfb from VESA VGA
[    4.559882] Console: switching to colour dummy device 80x25
[    4.559965] [drm] Replacing VGA console driver
[    4.560286] [drm] ACPI BIOS requests an excessive sleep of 10000 ms, using 1500 ms instead
[    4.568330] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.568333] [drm] Driver supports precise vblank timestamp query.
[    4.568505] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.584240] fbcon: inteldrmfb (fb0) is primary device
[    4.587435] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.587886] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    4.587945] [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0
[    4.594933] ACPI: Battery Slot [BAT1] (battery present)
[    4.595477] ACPI: AC Adapter [ACAD] (on-line)
[    4.603870] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
[    4.611085] wmi: Mapper loaded
[    4.622205] thermal LNXTHERM:00: registered as thermal_zone0
[    4.622207] ACPI: Thermal Zone [TZ00] (40 C)
[    4.622526] thermal LNXTHERM:01: registered as thermal_zone1
[    4.622528] ACPI: Thermal Zone [TZ01] (40 C)
[    4.651370] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    4.683077] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.683083] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.688762] r8169 0000:08:00.0 eth0: RTL8168g/8111g at 0xffffc90000692000, 1c:39:47:21:c3:92, XID 10900800 IRQ 52
[    4.688765] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.691880] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.691882] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.691883] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    4.691884] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.691885] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.691886] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
[    4.691887] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    4.701388] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    4.702041] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    4.702131] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    4.792379] Intel(R) Wireless WiFi driver for Linux
[    4.792379] Copyright(c) 2003- 2015 Intel Corporation
[    4.793884] iwlwifi 0000:09:00.0: Unsupported splx structure
[    4.813780] iwlwifi 0000:09:00.0: Direct firmware load for iwlwifi-3160-17.ucode failed with error -2
[    4.839452] iwlwifi 0000:09:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
[    4.877388] iwlwifi 0000:09:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[    4.877774] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled
[    4.878280] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled
[    5.018456] Adding 4095996k swap on /dev/sda5.  Priority:-1 extents:1 across:4095996k FS
[    5.044336] iTCO_vendor_support: vendor-support=0
[    5.045548] AVX2 version of gcm_enc/dec engaged.
[    5.045548] AES CTR mode by8 optimization enabled
[    5.046020] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.046404] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    5.046543] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.089875] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.137572] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[    5.141987] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    5.153450] kvm: disabled by bios
[    5.160925] intel_rapl: Found RAPL domain package
[    5.160928] intel_rapl: Found RAPL domain core
[    5.160932] intel_rapl: Found RAPL domain uncore
[    5.160934] intel_rapl: Found RAPL domain dram
[    5.171815] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[    5.175536] r8169 0000:08:00.0 enp8s0: renamed from eth0
[    5.186579] Non-volatile memory driver v1.3
[    5.197830] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
[    5.205289] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    5.205290] thinkpad_acpi: http://ibm-acpi.sf.net/
[    5.205291] thinkpad_acpi: ThinkPad BIOS A8CN47WW(V3.00), EC unknown
[    5.205292] thinkpad_acpi: Lenovo Lenovo B50-80, model 80EW
[    5.205677] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    5.205751] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    5.205831] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    5.205836] ACPI: \_SB_.PCI0.LPCB.EC0_.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20150818/nsarguments-230)
[    5.205845] ACPI: \_SB_.PCI0.LPCB.EC0_.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20150818/nsarguments-230)
[    5.205911] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input12
[    5.209203] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
[    5.209318] iwlwifi 0000:09:00.0 wlp9s0: renamed from wlan0
[    5.220631] psmouse serio1: elantech: Elan sample query result 05, 20, 97
[    5.280802] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[    5.329667] mousedev: PS/2 mouse device common for all mice
[    5.701129] Console: switching to colour frame buffer device 170x48
[    5.701162] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.704255] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.832041] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    5.832125] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    5.832220] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    5.967107] Bluetooth: Core ver 2.20
[    5.967131] NET: Registered protocol family 31
[    5.967133] Bluetooth: HCI device and connection manager initialized
[    5.967140] Bluetooth: HCI socket layer initialized
[    5.967143] Bluetooth: L2CAP socket layer initialized
[    5.967151] Bluetooth: SCO socket layer initialized
[    6.050885] usbcore: registered new interface driver btusb
[    6.067282] Bluetooth: hci0: read Intel version: 3707100100012d0d22
[    6.067285] Bluetooth: hci0: Intel device is already patched. patch num: 22
[    6.140307] media: Linux media interface: v0.10
[    6.147175] Linux video capture interface: v2.00
[    6.217260] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[    6.217632] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled
[    6.218140] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled
[    6.288446] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0c45:6514)
[    6.321521] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input16
[    6.321612] usbcore: registered new interface driver uvcvideo
[    6.321613] USB Video Class driver (1.1.1)
[    6.340771] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled
[    6.341380] iwlwifi 0000:09:00.0: L1 Enabled - LTR Enabled
[    6.361237] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[    6.362560] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[    6.375887] r8169 0000:08:00.0 enp8s0: link down
[    6.375952] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[    6.639360] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[    7.414152] fuse init (API version 7.23)
[    9.953062] wlp9s0: authenticate with 00:25:86:b3:e2:24
[    9.959476] wlp9s0: send auth to 00:25:86:b3:e2:24 (try 1/3)
[    9.961397] wlp9s0: authenticated
[    9.961559] iwlwifi 0000:09:00.0 wlp9s0: disabling HT as WMM/QoS is not supported by the AP
[    9.961563] iwlwifi 0000:09:00.0 wlp9s0: disabling VHT as WMM/QoS is not supported by the AP
[    9.962486] wlp9s0: associate with 00:25:86:b3:e2:24 (try 1/3)
[    9.965176] wlp9s0: RX AssocResp from 00:25:86:b3:e2:24 (capab=0x431 status=0 aid=7)
[    9.966236] wlp9s0: associated
[    9.966262] IPv6: ADDRCONF(NETDEV_CHANGE): wlp9s0: link becomes ready
[   10.746884] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
[   35.906598] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[   36.446142] usb-storage 2-2:1.0: USB Mass Storage device detected
[   36.446539] scsi host2: usb-storage 2-2:1.0
[   36.446876] usbcore: registered new interface driver usb-storage
[   36.460395] usbcore: registered new interface driver uas
[   37.166036] usb 2-2: USB disconnect, device number 2
[   37.595952] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[   37.610983] usb-storage 2-2:1.0: USB Mass Storage device detected
[   37.611077] scsi host3: usb-storage 2-2:1.0
[   38.782118] usb 2-2: USB disconnect, device number 3
[   39.015332] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd
[   39.030681] usb-storage 2-2:1.0: USB Mass Storage device detected
[   39.030774] scsi host4: usb-storage 2-2:1.0
[   40.028774] scsi 4:0:0:0: Direct-Access     ASMT     2115             0    PQ: 0 ANSI: 6
[   40.034608] sd 4:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[   40.034853] sd 4:0:0:0: [sdb] Write Protect is off
[   40.034858] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[   40.035091] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   40.074972]  sdb: sdb1
[   40.075951] sd 4:0:0:0: [sdb] Attached SCSI disk
[   41.464480] usb 2-2: USB disconnect, device number 4
[   41.467299] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[   41.467799] sd 4:0:0:0: [sdb] UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
[   41.467813] sd 4:0:0:0: [sdb] CDB: opcode=0x28 28 00 39 db 88 68 00 00 08 00
[   41.467822] blk_update_request: I/O error, dev sdb, sector 970688616
[   41.467832] sd 4:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00
[   41.467946] Buffer I/O error on dev sdb1, logical block 970686569, async page read
[   41.467977] Buffer I/O error on dev sdb1, logical block 970686570, async page read
[   41.467986] Buffer I/O error on dev sdb1, logical block 970686571, async page read
[   41.467993] Buffer I/O error on dev sdb1, logical block 970686572, async page read
[   41.468000] Buffer I/O error on dev sdb1, logical block 970686573, async page read
[   41.468007] Buffer I/O error on dev sdb1, logical block 970686574, async page read
[   41.468014] Buffer I/O error on dev sdb1, logical block 970686575, async page read
[   41.468134] Buffer I/O error on dev sdb1, logical block 970686569, async page read
[   41.468141] Buffer I/O error on dev sdb1, logical block 970686570, async page read
[   41.468148] Buffer I/O error on dev sdb1, logical block 970686571, async page read
[   41.697800] usb 2-2: new SuperSpeed USB device number 5 using xhci_hcd
[   41.712886] usb-storage 2-2:1.0: USB Mass Storage device detected
[   41.716320] scsi host5: usb-storage 2-2:1.0
[   42.554086] usb 2-2: USB disconnect, device number 5
[   42.780758] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd
[   42.795814] usb-storage 2-2:1.0: USB Mass Storage device detected
[   42.799238] scsi host6: usb-storage 2-2:1.0
[   43.377064] usb 2-2: USB disconnect, device number 6
[   43.603782] usb 2-2: new SuperSpeed USB device number 7 using xhci_hcd
[   43.618888] usb-storage 2-2:1.0: USB Mass Storage device detected
[   43.622311] scsi host7: usb-storage 2-2:1.0
[   44.190163] usb 2-2: USB disconnect, device number 7 
PD: Si ejecuto df no me lo muestra montado.

Responder